Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nagai, Haruyasu; Furuta, Yoshihiro*; Nakayama, Hiromasa; Satoh, Daiki
Journal of Nuclear Science and Technology, 60(11), p.1345 - 1360, 2023/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)A novel monitoring method for the quantitative visualization of 3D distribution of a radioactive plume and source term estimation of released radionuclides is proposed and its feasibility is demonstrated by preliminary test. The proposed method is the combination of gamma-ray imaging spectroscopy with the Electron Tracking Compton Camera (ETCC) and real-time high-resolution atmospheric dispersion simulation based on 3D wind observation with Doppler lidar. The 3D distribution of a specific radionuclide in a target radioactive plume is inversely reconstructed from line gamma-ray images from each radionuclide by several ETCCs located around the target by harmonizing with the air concentration distribution pattern of the plume predicted by real-time atmospheric dispersion simulation. A prototype of the analysis method was developed, showing a sufficient performance in several test cases using hypothetical data generated by numerical simulations of atmospheric dispersion and radiation transport.
Terada, Hiroaki; Nagai, Haruyasu; Kadowaki, Masanao; Tsuzuki, Katsunori
Journal of Nuclear Science and Technology, 60(8), p.980 - 1001, 2023/08
Times Cited Count：4 Percentile：98.08(Nuclear Science & Technology)It is essential to establish a method for reconstructing the source term and spatiotemporal distribution of radionuclides released into the atmosphere due to a nuclear accident for emergency countermeasures. We examined the dependency of a source term estimation method based on Bayesian inference using atmospheric dispersion simulation and environmental monitoring data on the availability of various monitoring data. Additionally, we examined the applicability of this method to a real-time estimation conducted immediately after an accident. A sensitivity analysis of the estimated source term during the Fukushima Daiichi Nuclear Power Station (FDNPS) accident for combinations of various monitoring data indicated that using monitoring data with a high temporal and spatial resolution and the concurrent use of air concentration and surface deposition data is effective for accurate estimation. A real-time source term estimation experiment assuming the situation of monitoring data acquisition during the FDNPS accident revealed that this method could provide the necessary source term for grasping the overview of surface contamination in the early phase and evaluating the approximate accident scale. If the immediate online acquisition of monitoring data and regular operation of an atmospheric dispersion simulation are established, this method can provide the source term in near-real time.
Nanjo, Kotaro; Shiotsu, Hiroyuki; Maruyama, Yu; Sugiyama, Tomoyuki; Okamoto, Koji*
Journal of Nuclear Science and Technology, 60(7), p.816 - 823, 2023/07
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Hidaka, Akihide; Kawashima, Shigeto*; Kajino, Mizuo*
Journal of Nuclear Science and Technology, 60(7), p.743 - 758, 2023/07
Times Cited Count：2 Percentile：90.12(Nuclear Science & Technology)An accurate estimation of radionuclides released during the Fukushima accident is essential. Therefore, authors investigated Te release using the Unit emission-regression estimation method, in which the deposition distribution is weighted based on the hourly deposition obtained from mesoscale meteorological model calculations assuming Unit emissions. The previous study focused on confirming the applicability of this method. Subsequent examination revealed that if any part of the time when a release have occurred is missing from the estimated release period, the entire source term calculation will be distorted. Therefore, this study performed the recalculation by extending the estimation period to cover all major releases. Consequently, unspecified release events were clarified, and their correspondence to in-core events was confirmed. The 
Te release caused by Zr cladding complete oxidation can explain the regional dependence of the Te/
Cs ratio in the soil contamination map.
Nanjo, Kotaro; Ishikawa, Jun; Sugiyama, Tomoyuki; Pellegrini, M.*; Okamoto, Koji*
Journal of Nuclear Science and Technology, 59(11), p.1407 - 1416, 2022/11
Times Cited Count：7 Percentile：88.9(Nuclear Science & Technology)Brumm, S.*; Gabrielli, F.*; Sanchez-Espinoza, V.*; Groudev, P.*; Ou, P.*; Zhang, W.*; Malkhasyan, A.*; Bocanegra, R.*; Herranz, L. E.*; Berda
, M.*; et al.
Proceedings of 10th European Review Meeting on Severe Accident Research (ERMSAR 2022) (Internet), 13 Pages, 2022/05
Onoda, Yuichi; John Arul, A.*; Klimonov, I.*; Danting, S.*
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 13 Pages, 2022/04
Lind, T.*; Herranz, L. E.*; Sonnenkalb, M.*; Maruyama, Yu
Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 15 Pages, 2022/03
Arokiaswamy, J. A.*; Batra, C.*; Chang, J. E.*; Garcia, M.*; Herranz, L. E.*; Klimonov, I. A.*; Kriventsev, V.*; Li, S.*; Liegeard, C.*; Mahanes, J.*; et al.
IAEA-TECDOC-2006, 380 Pages, 2022/00
The IAEA coordinated research project on "Radioactive Release from the Prototype Sodium Cooled Fast Reactor under Severe Accident Conditions" was devoted to realistic numerical simulation of fission products and fuel particles inventory inside the reference sodium cooled fast reactor volumes under severe accident conditions at different time scales. The scope of analysis was divided into three parts, defined as three work packages (WPs): (1) in-vessel source term estimation; (2) primary system/containment system interface source term estimation; and, (3) in-containment phenomenology analysis. Comparison of the results obtained in WP-1 indicates that the release fractions of noble gases and cesium radionuclides, and fractions of radionuclides released to the cover gas are in a good agreement. In the analysis using a common pressure history in WP-2, the results were in good agreement indicating that the accuracy of the analysis method of each institution is almost the same. The standalone case, which uses a set of pre-defined release fractions, was defined for WP-3 which enables to decouple this part of analysis from previous WPs. There is broad consensus among the predicted results by all the participants in WP-3.
Planning and Co-ordination Office, Sector of Nuclear Safety Research and Emergency Preparedness
JAEA-Review 2021-019, 58 Pages, 2021/11
JAEA-Review-2021-019.pdf:2.26MB
In response to the directives of the 4th medium-to-long-term objectives, Japan Atomic Energy Agency will formulate the 4th medium-to-long-term plan and run its operation according to the plan from the fiscal year 2022. Consequently, the Sector of Nuclear Safety Research and Emergency Preparedness has reviewed the strategies of the safety research for contributing to the demand, "the continuous improvement of nuclear safety and the effectiveness of nuclear disaster prevention". It was also discussed how to proceed the safety research over the medium-to-long-term plan period based on the proposed new strategies. From the viewpoint of developing human resources and maintaining research capabilities in the sector, discussion was made on measures to pass on the knowledge and skills of senior and mid-career researchers to young researchers. The main elements of the proposed strategies are: (1) to efficiently and effectively develop both problem-solving research and advanced or leading research, considering the importance and needs on the nuclear safety and corresponding to regulatory trends and introduction of new technologies, (2) to produce research results of high quality for social implementation, including proactive proposal of measures for enhancing rationality of nuclear safety and regulation by utilizing risk information, and (3) to promote development of human resources and maintenance of technological base through challenging new research subjects. This report summarizes results of the discussion on the medium-to-long-term safety research strategies and the research plans based on the proposed strategies.
C absorber material on melt progression and chemical forms of iodine or cesium under severe accident conditionsHidaka, Akihide
Insights Concerning the Fukushima Daiichi Nuclear Accident, Vol.4; Endeavors by Scientists, p.341 - 356, 2021/10
Maruyama, Yu; Yoshida, Kazuo
Nihon Genshiryoku Gakkai-Shi ATOMO
, 63(7), p.517 - 522, 2021/07
no abstracts in English
Terada, Hiroaki; Nagai, Haruyasu; Tsuzuki, Katsunori; Furuno, Akiko; Kadowaki, Masanao; Kakefuda, Toyokazu*
Journal of Environmental Radioactivity, 213, p.106104_1 - 106104_13, 2020/03
Times Cited Count：50 Percentile：93.07(Environmental Sciences)In order to assess the radiological dose to the public resulting from the Fukushima Daiichi Nuclear Power Station accident in Japan, the spatial and temporal distribution of radioactive materials in the environment is necessary to be reconstructed by computer simulations with the atmospheric transport, dispersion and deposition model (ATDM) and source term of radioactive materials discharged into the atmosphere is essential. In this study, we carried out refinement of the source term and improvement of ATDM simulation by using an optimization method based on Bayesian inference with various measurements (air concentration, surface deposition, and fallout). We also constructed the spatiotemporal distribution of some major radionuclides in the air and on the surface (optimized dispersion database) by using the optimized release rates and ATDM simulations which is used for the comprehensive dose assessment by coupling with the behavioral pattern of evacuees from the accident.
Hidaka, Akihide
Journal of Nuclear Science and Technology, 56(9-10), p.831 - 841, 2019/09
Times Cited Count：12 Percentile：80.27(Nuclear Science & Technology)The insoluble Cs particles (Type A) were firstly observed in Tsukuba-city on the morning of March 15. The particles have been considered to be generated in RPV of Unit 2 by evaporation/condensation based on the measured 
Cs/Cs ratio and the core temperatures of each unit. However, the Type A particles with smaller diameter than the Type B particles of Unit 1 origin, are covered by almost pure silicate glass and have a trace of the quenching. This indicates that the particles could have been generated due to the melting of the HEPA filter in SGTS by the fire of H
detonation at Unit 3, and atomization followed by quenching of the molten materials by air blast of the explosion. Although the particles were mostly dispersed to the sea because of the wind direction, some of them deposited onto the lower elevation of R/B at Unit 3, could have been subsequently re-suspended and released into the environment, by the steam flow in the R/B caused by restart of the Unit 3 core cooling water injection at 2:30 of March 15.
Tamaki, Hitoshi; Ishikawa, Jun; Sugiyama, Tomoyuki; Maruyama, Yu
Proceedings of 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-18) (USB Flash Drive), p.72 - 82, 2019/08
JAEA participated in the OECD/NEA BSAF2 project with our integrated severe accident analysis code, THALES2/KICHE, in order to analyze and discuss the accident progression and source term of the accident at the Fukushima Daiichi NPS. One of important characteristics of THALES2/KICHE code is that it has the capability of predicting iodine chemistry based on reaction kinetics in the aqueous phase. JAEA performed the three week analysis for the accident at unit 1 on the basis of the boundary conditions and assumptions proposed by the BSAF2 project and our own assumptions. In addition to the failure of the drywell, it was assumed in the present analysis that continuous leakage occurred through the containment venting line due to incomplete closing of valves in the line. The releases of fission products, especially for iodine and cesium, within three weeks after the earthquake were estimated to be approximately 6% and 1% of the initial inventory, respectively.
Tamaki, Hitoshi; Ishikawa, Jun; Sugiyama, Tomoyuki; Maruyama, Yu
Proceedings of 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-18) (USB Flash Drive), p.100 - 111, 2019/08
JAEA participated in the OECD/NEA BSAF2 project with our integrated severe accident analysis code, THALES2/KICHE, in order to analyze and discuss the accident progression and source term of the accident at the Fukushima Daiichi NPS. One of important characteristics of THALES2/KICHE code is that it has the capability of predicting iodine chemistry based on reaction kinetics in the aqueous phase. JAEA performed the three week analysis for the accident at unit 2 on the basis of the boundary conditions and assumptions proposed by the BSAF2 project and our own assumptions. One of focusing points in the BSAF2 project was the trend of measured data of reactor vessel from 20:00 March 14 to 02:00 March 15. An assumption was made that the lower part of the suppression chamber failed to form a water leakage path. The released iodine and cesium within three weeks after the earthquake were predicted to be approximately 3% and 0.1% of the initial inventory, respectively.
Ishikawa, Jun; Tamaki, Hitoshi; Sugiyama, Tomoyuki; Maruyama, Yu
Proceedings of 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-18) (USB Flash Drive), p.536 - 547, 2019/08
Chino, Masamichi*; Nagai, Haruyasu
Environmental Contamination from the Fukushima Nuclear Disaster; Dispersion, Monitoring, Mitigation and Lessons Learned, p.50 - 61, 2019/00
Times Cited Count：8 Percentile：82.45(Environmental Sciences)Temporal variations in the amount of radionuclides released into the atmosphere during the Fukushima Daiichi Nuclear Power Station accident and their atmospheric dispersion are essential to evaluate the environmental impacts and resultant radiological doses to the public. We have estimated the atmospheric releases during the accident by comparing measurements with calculations by atmospheric deposition model. UNSCEAR compared several estimated source terms and used our source term for estimating levels of radioactive material in the terrestrial environment and doses to the public. To improve our source term, we recently made detailed source term estimation by using additional monitoring data and WSPEEDI including new deposition scheme.
Tamaki, Hitoshi; Ishikawa, Jun; Sugiyama, Tomoyuki; Maruyama, Yu
Proceedings of Asian Symposium on Risk Assessment and Management 2018 (ASRAM 2018) (USB Flash Drive), 6 Pages, 2018/10
In the accidents at Fukushima Dai-ichi Nuclear Power Station, Tsunami caused loss of electric power supply and this event led to core melt and failure of Containment vessel. Finally, fission products were released to the environment. Currently, the activities for understanding of accident progressions are carried out based on the measured data during the accident, accident progression analysis using integrated severe accident analysis codes and investigation of inside of reactor buildings and containment vessels. On the other hand, there are some research activities with combination of accident progression analysis and accident consequence analysis. In Japan Atomic Energy Agency (JAEA), the research project of combination of these analyses using the computational simulation codes has been started. The results obtained from the combination analysis are expected to have broad width of uncertainty because of many uncertainty factors in this combined analysis. In order to perform the analysis efficiently, sensitivity analysis for failure location on containment vessel and its failure size were carried out by THALES2/KICHE developed by JAEA at first. This analysis was performed on unit 1, since it was the first plant to release radioactive materials to the environment during the accident and its consequence had no effect from other plants. The authors focused on the failure of containment vessel head flange, penetration seal and vacuum breaker pipe, and possibility of partial open of vent valve based on the investigations of reactor building inside performed by TEPCO. This paper presents the results obtained from this sensitivity analysis.
Ishikawa, Jun; Zheng, X.; Shiotsu, Hiroyuki; Sugiyama, Tomoyuki; Maruyama, Yu
Proceedings of Asian Symposium on Risk Assessment and Management 2018 (ASRAM 2018) (USB Flash Drive), 6 Pages, 2018/10
